Maintenance of knapsack manual sprayer Factory Suppliers Manufacturers Quotes

News

Home>News > Industry News

Maintenance of knapsack manual sprayer

Maintenance of knapsack manual sprayer

(1) when the knapsack manual sprayer is in use, it should stop working immediately and check the reason for maintenance. If the rocker arm is heavy, the leather bowl and the moving parts should be filled with oil. If the nozzle is blocked, the nozzle should be screwed off to remove dirt.
(2) after the knapsack manual sprayer is used up, the residual liquid in the bucket should be poured out, cleaned, washed with hot alkali, washed with water, dried in the bucket, and hung in the room. All cortical gaskets should be dipped in oil so as to prevent dry shrinkage. The components of the switch should be opened, hanging in a cool and dry place, where the moving parts and non plastic joints, should be coated with rust rust, rubber parts do not grease.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Message